What is a container pin?Twistlock Stacking Pins are designed for stacking shipping containers on top of each other. The container stacking pin/cone features a plate with a locating pin on either end that slots into the holes cut out on the corner casts.Each container requires 4 stacking pins for saf
What is the Container corner casting? Shipping Container corner castings are the corners of a shipping container. Corner casting is the structural department of a shipping container. Its function is connecting to other containers both horizontally and vertically as well as being connected to transpo
Our STEEL CORNER FITTINGS meet ISO 1161 and are ABS certified.Corner Fittings are available as:Top RightTop LeftBottom RightBottom LeftThese are the fittings found on all ISO type Containers used for intermodal shipping. They are designed to accept a variety of TANDEMLOC products. They are the fitti
Are all the corner castings the same?There are eight ISO corner castings in total: top left, top right, bottom right and bottom left. The descriptions relate to the position of the castings as on the end and door faces of the container, as you look at the container from the outside. Each shipping co
Where will I find corner castings?Corner castings are found on all eight corners of an ISO shipping container. They each have three holes, one in each side of the outward facing surfaces of the casting. Sometimes, non standard containerised units will also have been made using ISO1161 corner casting